When baking soda is mixed with vinegar, the acid breaks down baking soda, releasing carbon dioxide gas that can help lift dirt from the surfaces being cleaned. Here are some recipes to try. Freshen your sink by mixing one part of baking soda with two parts of vinegar.
Kitchen Sink: If you have scum or grease buildup on your kitchen sink, vinegar and baking soda can be effective. For the sink, sprinkle baking soda on the surface before scrubbing and rinsing it off. Soak paper towels in white vinegar and let them line the sink for 20 minutes before wiping the surface down.
Simple Cleaner Ingredients:
1 1/2 cups baking soda. 1/2 cup liquid Castile soap. 2 tablespoons white vinegar. 2 tablespoons water.
For most purposes, Harris recommends combining one part baking soda with two parts white vinegar. That combo can cut through grease and lift stains, sometimes better than store-bought cleaners, she says. Important: Never combine vinegar with bleach.
You should use a ratio of 1:2 baking soda to vinegar. In other words, if you're using ½ cup of baking soda, use 1 cup of vinegar, or if you're using a cup of baking soda, use 2 cups of vinegar.
For extra-stubborn clogs, you can let the fizz mixture sit overnight or combine this method with plunging. If your toilet remains clogged or continues to get clogged, this may be an indication of plumbing problems such as mineral buildup or pressure issues.
The two products generate quite a reaction. When vinegar (dilute acetic acid) and baking soda (sodium bicarbonate) mix together, the pair "foams up" to produce carbon dioxide gas, as well as liquid water, acetate ions and sodium ions. The carbon dioxide gas is what produces the bubbles.
If your drain is clogged, clean it by pouring a pan of boiling water down the drain. Follow the water with 1 cup of baking soda and one cup of vinegar. You'll probably see some bubbles as the chemical reaction works its magic and opens your drain.
Baking soda is a safe deodorizer, whitener, and household cleaner—and it's an effective natural grout cleaner. Because baking soda is also a mild abrasive, using it for cleaning grout lines gives you extra firepower without the risk of scratching your tile.
Simply pour some white vinegar into a plastic bag and secure it around your shower head with a hair tie. Leave overnight and remove first thing in the morning. You'll be amazed at the results!
Citric acid
More importantly, it's probably even more effective than vinegar for getting rid of that brown stain in the toilet. Simply pour a kettle of almost boiling water into the bowl, follow up with 250ml of citric acid, and leave it for some hours – preferably overnight. The next day, scrub and flush.
Baking soda and vinegar, when mixed together, can form a chemical reaction that looks sort of like an eruption. This chemical reaction can help clear your toilet and any pipe clogs that you might have.
Spray full-strength vinegar on first and let it sit for a few minutes. Wipe the area with a nonabrasive cloth or sponge. If any stains remain, sprinkle baking soda on a damp sponge and scrub. Then wipe with a clean wet cloth to rinse.
While the baking soda and vinegar solution is effective in breaking down a clog, it will also cause your drain to become more damaged. The baking soda's abrasive nature will wear down your drain over time. This is why you should avoid using baking soda and vinegar solution for cleaning out your drain.
Make a paste of baking soda and water. Wet the surface of the tub or shower stall; gently rub with the paste on a sponge or soft nylon brush. Rinse thoroughly. Never use an abrasive cleaner (such as common scouring powder), any abrasive scouring pad, steel wool, or a scraper.
Anything with deep grooves or cracks. Baking soda leaves behind a white, dusty residue after it dries. Therefore, you should never use it to clean surfaces with deep grooves or cracks because the residue will get left behind and can build up.
Do You Have to Rinse after Cleaning with Vinegar? Rinsing is not necessary! If you're simply using a vinegar and water solution to wipe and disinfect, you won't need to rinse. However, if there's also plenty of dirt and grime you're wiping away, you may also want to rinse with some extra water.