Set both access points to the same network name (SSID). Make sure both have the same network security settings, non-mixed, AES only, Same network keys, but on non-overlapping channels.
Check if your device is auto-switching between two Wi-Fi networks. Your device may jump between known Wi-Fi networks, which you experience as a temporary loss of signal. When Wi-Fi signals are weak, your device may search for a stronger signal automatically.
Restart your router, or reset it to default settings. You can also try restarting your PC. Update your Wi-Fi adapter drivers and Wi-Fi firmware drivers. Ensure you only download firmware drivers from the manufacturer's website to avoid malware or outdated products.
Your router is down. You're entering an incorrect Wi-Fi password. Your laptop is too far from your router. Your device may not support the Wi-Fi network it's connecting to.
Most problems originate on the desktop Windows side of the connection, and could be anything from the software misinterpreting the connection somehow, or hardware like the wireless card not being activated properly.
Increased chance of jamming. Transmission speed is comparably less. it has a limited amount of bandwidth for communication and breaches of network security. Wireless networks can be easily hacked.
Your Internet may keep disconnecting during bad weather due to a problem with your ISP's network, a power outage, or a problem with your modem or router. Try resetting your modem and router, moving them to a better location, or contacting your ISP for assistance.
To disable this setting in Device Manager, expand Network Adapters, right-click the adapter, select Properties, select the Power Management tab, and then clear the Allow the computer to turn off this device to save power check box.
On Android
To stop your Android device from auto-connecting to open networks: Open the Android settings and go to Network & Internet. Select Wi-Fi > Wi-Fi preferences. Turn off the Connect to public networks toggle switch.
When APs have overlapping coverage they should be set to different non-overlapping channels. This prevents the APs from causing an increase in channel utilization or interfering with each other.
A switch connects devices such as a desktop, laptop, and access point to the router. An access point connects a device wirelessly. Sometimes modem, router, switch, and access point come all bundled in one device.
Install your APs in a central location away from any corners, walls, or other physical obstructions to provide maximum signal coverage. Install your APs in a high location to provide the overall best signal strength reception and performance for your wireless network.
Many of the Windows 10 users who recently upgraded their Windows are reporting to have an issue with their WiFi which is keeping disconnecting frequently. The reason behind this error may be you have old/incompatible WiFi driver installed on your computer or it may be because Windows is turning network driver off.
Old firmware can cause this issue as the adapter will disable itself if it receives a large number of bad frames from the access point. Change your Wi-Fi adapter's power settings. Click here for our guide on Wi-Fi power settings. Use the built-in Network Reset for Windows 10.
The internet keeps disconnecting problem might be caused by hardware or software issues. Loss cable, outdated/broken router/modem model. The WiFi signal is not sufficient. Your network is overloaded.
This is mostly a connectivity issue that can be fixed by having wires run high-speed data cables inside the home to connect to Wi-Fi access points. Additionally, many routers allow one to change Wi-Fi channels so that it does not interfere with other people's channels which could be causing the NBN dropouts.
Adjust the WiFi Power Management Settings
Windows 11 sometimes puts some system services to sleep, including WiFi and Bluetooth, to save battery. If WiFi keeps disconnecting on your Windows 11 computer, it might have to do with the power management settings.
On the Device Manager window, click Network adapters then look for the name of your wireless adapter. To check its status, right-click your computer's network adapter then select Properties. Once the adapter is enabled, there would be a This device is working properly notification if the adapter is working properly.