"The biggest don't when it comes to toilet tanks is bleach — do not use bleach or products containing bleach inside the tank, as it can corrode the internal parts of your toilet," says Patty Stoffelen, a bath fixtures merchant for The Home Depot to Martha Stewart.
Yes. You should try and avoid using bleach in the toilet when possible, and opting instead to apply a non-chemical cleaner such as soapy water for cleaning purposes. In doing so, you'll avoid causing potential damage to the glazing on the porcelain surface of the toilet.
BLEACH DOESN'T CLEAR DRAIN CLOGS.
It cannot dissolve things like food waste, breadcrumbs, grease, and hair. Instead, pouring bleach into a clogged drain will make things worse. The bleach could react with other chemicals, creating dangerous fumes, and if the reaction is violent, it can even burst your drain pipes.
Bleach is an effective way to deal with blocked toilet drains as it is a dilute solution of sodium hypochlorite and also contains a high chlorine concentration. Using bleach by itself or mixing it with boiling water are effective ways to unclog a toilet.
Clean and disinfect your toilet bowl with 1/2 cup chlorine bleach. Pour it into the bowl, and let it stand for ten minutes. Then scrub with the toilet brush and flush.
Once a week at least.
Tetro says your bathroom is the ultimate bacteria host; E. coli can be found within six feet of the toilet and in the sink. To keep it at bay, disinfect the toilet and sink at least once weekly, and the bathtub every two weeks — more if you shower often.
Bleach is a common cleaner found in most homes, but is it safe to use in homes with PVC piping? In short, yes. You can safely use bleach to clean and disinfect your PVC pipes, as long as you dilute it first and avoid mixing it with other chemicals.
Pour Some Bleach in It: Bleach, like other disinfectants, kills almost every species of odor-causing bacteria commonly found in drains and sewer lines. So, an easy DIY step to reduce drain odor is to use bleach.
Regularly disinfecting and deodorizing your toilet is important for a healthy home. With our easy to follow steps, you can use bleach to clean, disinfect, and deodorize toilets in no time. Safe around kids, pets & food. * * When used as directed.
White vinegar and baking soda in equal parts is a cost-efficient and effective means of getting rid odors in a toilet. Add them to the tank, mix them in and then use the toilet brush to gently scrub the tank. Let it sit for a few hours, scrub the tank again and flush.
Remove all debris and water from the cistern. If you can do it safely, scrub the inside of the cistern with a stiff brush and a solution of 1 cup (about 0.25 liter) of unscented liquid household bleach (5%–9% sodium hypochlorite) mixed with 10 gallons (about 38 liters) of water.
Bleach has disinfectant and whitening properties, which are good for cleaning toilets. However, it won't remove limescale build up. Plus, if you're worried about bleach eroding your toilet or pipes, you may want to avoid it. Experts agree that bleach is safe to use on toilets in small concentrations.
Vinegar and baking soda produce that oh-so-familiar chemical reaction that powers through buildup and loosens tough stains. While it might seem like it's chewing its way through grime, it's not powerful enough to damage the porcelain finish of the toilet bowl.
The corrosive qualities of bleach can discolor your sink or drain, damage the blades of your garbage disposal, destroy rubber gaskets and corrode plastic or lead pipes (in older homes).
There could be odor-causing bacteria feeding on debris in your pipes. This process will give off a foul-smelling hydrogen sulfide gas, which smells like sewage or rotten eggs. Also, mold grows where it's warm and wet — and mold growth on the debris causing a drain clog can also cause a bad smell.
Bleach can be corrosive to the steel and ruin your sink. If you have a porcelain sink, check the pipes under your sink. Don't use bleach if you have stainless-steel pipes. Vinegar may be a reliable natural disinfectant, but if you're looking for something with more of a kick, bleach may be the way to go.
All right, so in summary, don't use bleach; use vinegar. That helps with any mildew growth—keeps you running clean. It's not going to actually clean your A/C drain, but it can prevent some backups.
CHLORINE IS CORROSIVE TO COPPER
This has a corrosive effect on the inside of the pipes and slowly erodes the piping over time. Eventually, chlorine eats all the way through the pipes and creates pinhole leaks, which if left unchecked, can cause a myriad of problems within the home.
For some reason, many luxury hotels don't have toilet brushes in their bathrooms. The general response to any question about a lack of toilet brush is 'hotels have housekeeping services that clean the toilet for you.
Because water deposits build up under a toilet's rim, it can take only 24-48 hours for colonies to start breeding. As it grows, you will see what looks like black debris or rings inside the bowl. This can cause respiratory problems for people as the mold and mildew release tiny spores into the air.
Over time, if your toilet isn't cleaned, the minerals in the toilet water can stain your toilet bowl. These stains pick up and trap dirt particles and bacteria, making your toilet dirty and unhygienic. Mold growth. Mold grows quickly in moist environments, and a damp toilet bowl is a perfect place for mold to grow.
Professional cleaners often use the same household supplies as you would: toilet-bowl cleaner (or bleach), disinfectant wipes, rubber gloves, as well as a nonscratch scrub sponge, a microfiber cloth, or paper towels. A handheld scrub brush or a pumice stone can get to especially tough stains.
To remove limescale from the bottom of your toilet you will want to pour vinegar into your toilet bowl and leave that on there for three to four hours. After the vinegar sits, you can scrub those stains with either a toilet brush or a wet pumice stone and flush the toilet.