Is the SSID the same as the IP address? No, the SSID is not the same as the IP address. It is the name of your wireless network, while the IP address is a unique identifier assigned to each device on a network.
Look for a sticker on your router.
Many routers provided by internet service providers have a sticker on the bottom or side, listing the default SSID. This is usually labeled as the SSID or "Network Name" and may be located next to a bar code.
SSID is simply the technical term for a Wi-Fi network name. When you set up a wireless home network, you give it a name to distinguish it from other networks in your neighbourhood. You'll see this name when you connect your devices to your wireless network.
A default SSID can be as simple as the router's brand name to something a little more complex. For example, while many default SSIDs are called “Linksys” or “Netgear," others are mixtures of brand names and random numbers.
SSID stands for Service Set IDentifier and is your network's name. If you open the list of Wi-Fi networks on your laptop or phone, you'll see a list of SSIDs. Wireless router or access points broadcast SSIDs so nearby devices can find and display any available networks.
A service set identifier (SSID) is a sequence of characters that uniquely names a Wi-Fi network. An SSID is sometimes referred to as a network name. This name allows stations to connect to the desired network when multiple independent networks operate in the same physical area.
SSID is the name of a network connection. It stands for Service Set Identifier. When you open the list of available Wi-Fi networks on your laptop or phone, the different names and codes/numbers are SSIDs.
Is the SSID the same as the IP address? No, the SSID is not the same as the IP address. It is the name of your wireless network, while the IP address is a unique identifier assigned to each device on a network.
An IP address is a unique address that identifies a device on the internet or a local network. IP stands for "Internet Protocol," which is the set of rules governing the format of data sent via the internet or local network.
If you don't have the network name (SSID), you can use the BSSID (Basic Service Set Identifier, the access point's MAC address), which looks something like 02:00:01:02:03:04 and can usually be found on the underside of the access point. You should also check the security settings for the wireless access point.
The first thing you should do when setting up a smartphone hotspot is change your Service Set Identifier (SSID)—this is your network name. You should not use the name automatically assigned by your smartphone (both iPhones and Android phones do this), but rather create your own.
You can run two routers with the same SSID to increase the range of your Wi-Fi network, but you must set up one router to handle the network administration and the other to act as a bridge back to the primary router.
Yes, two access points can have the same SSID. However, you will need to make sure that they are on different channels so that they don't interfere with each other.
Deciding Whether to Change Your SSID
Changing it after a wireless network is established causes all the wireless devices to disconnect, and they must rejoin the network using the new name. Otherwise, the choice of name doesn't affect a Wi-Fi network's operation at all.
The SSID is the name of your wireless network. This is what you will look for when connecting wireless computers and devices. The Password is the secret word or phrase you will enter when first connecting a device to your wireless network.
You must enter the network information manually in this situation. An SSID can contain up to 32 alphanumeric characters. Alphanumeric characters are a combination of alphabetic (letters A to Z) and numeric (numbers 0 to 9) characters.
Every device has a default password, so if you haven't changed it, look at the bottom of your modem/router—it's probably there. If it's not, also take a peek at the instructions that came with your device.
Home networks don't require the use of a visible SSID unless the network uses several different access points that devices roam between. If your network uses a single router, turning off this feature is a trade-off between the potential security benefits and a loss of convenience in setting up new home network clients.
WPS stands for WiFi Protected Setup. A router with a WPS button can allow any device to automatically connect to your router when the WPS button is pressed. When you press the WPS button, your router looks for compatible devices right away and allows those devices automatically connect.