The flute has three main parts: the head joint, the body and the foot joint. The rod system works with the keys to make sure the right keys go up or down.
The parts of the flute are in three major sections. These are the head joint, body joint, and foot joint. The body joint connects both the head and foot joints together to form a complete instrument. The headjoint is where tone creation begins.
The flute is not made of one continuous piece of metal; it is divided into three sections called joints. These three are the head joint, the middle joint and the foot joint. These pieces are connected by thinner metal tubes called tenons.
The flute consists of a head joint, body joint, and foot joint, as shown in Figure 1. The connecting part between the body and foot joint is very short, while the connecting part between the head joint and body joint is a few centimeters long. ... ...
The woodwind family of instruments includes, from the highest sounding instruments to the lowest, the piccolo, flute, oboe, English horn, clarinet, E-flat clarinet, bass clarinet, bassoon and contrabassoon.
On a fipple flute the mouthpiece, or fipple, provides a shaped passageway for air to be blown against an edge, producing turbulent flow which excites the resonant vibrational modes of the air column.
Headjoint: the “top” of the flute. Houses the mouth-hole or embouchure. The top end is sealed with a small corked plug above the embouchure and capped with the end-cap. We make headjoints both with and without tuning slides, the tuning slide necessitating a two-piece head joint.
With a fipple instrument such as a duct flute, the performers breath is directed through a mouthpiece into a duct (often called the windway) where the bottom portion of the duct is referred to as a fipple. The air then flows across a sharp edge (often called the labium), where the air column is split.
Mouthpiece. The opening where you breathe into the flute. Also called the “Mouth Pipe” ([Nakai 1996]). Head End.
The 6 pieces are: Lullaby, Dance, In the mountains of Azerbaijan, At the Spring" and Nocturne.
A melodic instrument for the most part, the flute has a clear and bright sound with a distinctive warmth, refinement, and subtlety to its tone. Another feature of the flute is the use of expensive materials such as gold, silver, and gems in its manufacture.
A bansuri is traditionally made from a single hollow shaft of bamboo with six or seven finger holes. Some modern designs come in ivory, fiberglass and various metals. The six hole instrument covers two and a half octaves of music.
Slide whistle (aka swanee or swannee whistle, piston flute, jazz flute)
The Traditional North Indian flute called the Bansuri has 6 holes while the traditional South indian flute called the Pulil/Veenu had 7 holes.
A slide whistle (variously known as a swanee or swannee whistle, lotos flute piston flute, or jazz flute) is a wind instrument consisting of a fipple like a recorder's and a tube with a piston in it.
The Flute family does not have Reed and it produces the vibration by blowing in its tone hole. The Reed instruments are divided in two subfamilies: the Single Reed instruments and the Double Reed instruments. The Single Reed instruments produce the sound by placing a big reed onto the opening part of a mouthpiece.
Sometimes the mouthpiece itself is also called an embouchure. Brass and woodwind instruments are all played by blowing into or across an opening, the embouchure.
The lip plate is a curved, oval-shaped metal plate, which is connected to the body of the flute by a component underneath it known as a riser. The lip plate, with which the lips make contact. Lip plate and riser (foreground) during assembly.
Derived from the compositions, trio often denotes a group of three solo instruments or voices. The most common types of such compositions are the piano trio of typically piano, violin and cello, and the string trio of commonly violin, viola and cello. Other types of trio include: Brass trio (horn, trumpet, trombone)
The piccolo (/ˈpɪkəloʊ/ PIH-kə-loh; Italian for 'small') is a half-size flute and a member of the woodwind family of musical instruments.