A constantly running toilet is typically due to an issue with the flush valve assembly, so one of the first parts to inspect should be the chain and flapper. If the chain is too short, then it won't allow the flapper to close properly, but if it is too long it may get trapped underneath the flapper, causing it to leak.
One of the most common reasons behind a toilet that won't stop running is a flapper in need of replacing. Worn out flappers allow for water to constantly slip from your toilet's tank into the bowl. Since the seal prevents that constant flow of water is worn out, this can result in an endless flow.
Thankfully, a running toilet is not an emergency. Even if the toilet that is running is clogged, and so water is overflowing the bowl or basin, you can just turn off the water to the toilet with the valve on the supply line. All you need to do then is wait for the plumber's regular business hours.
Like a slowly dripping faucet, a running toilet can waste thousands of gallons of water each day. Worse yet, the issue is, more often than not, indicative of a much larger problem. If your toilet keeps running or is overflowing, contact a plumbing company immediately and schedule running toilet repair services.
If your toilet backs up more and more often accompanied with a horrible odor it's time to call a plumber. If you continue trying to flush the toilet at this point it could start backing up sewage into your shower and home because of a blockage in your main sewer line.
The True Cost of a Running Toilet
Typically, a running water toilet will waste thousands of gallons of water per month which translates to approximately $200 unnecessarily tacked onto your monthly water bill-- that's nearly $2,500 dollars a year down your toilet bowl.
If your toilet randomly runs off and on for a few seconds, it is likely due to a broken flapper. While the flapper is supposed to drop down and re-seal the tank when enough water has gone through, a cracked or decaying flapper will allow water to keep flowing through and run periodically.
A constantly running toilet is typically due to an issue with the flush valve assembly, so one of the first parts to inspect should be the chain and flapper. If the chain is too short, then it won't allow the flapper to close properly, but if it is too long it may get trapped underneath the flapper, causing it to leak.
Irregular Running Water
Check that your toilet tank ball falls onto your valve seal. If it lands off-center or doesn't connect at all, you need to replace the valve. To fix this problem, a plumber will need to remove the defective tank ball and then put the new valve in place.
Depending on why your toilet is constantly running, you can face a number of other problems, too. A leak toward the base of your toilet can lead to serious water damage in your bathroom as the water leaks through your floor, subflooring, and more.
No need to worry, a running toilet is usually a simple fix. The three most common causes are a broken or dirty flapper, too long or too short of a chain between the flush lever and the flapper or a float that is out of position.
According to Fixr, the average toilet valve repair cost is between $75 and $200 to replace a flush valve or up to $400 to fix a constantly running toilet. This includes the cost of the plumber's time for the toilet repair and the cost of the toilet parts.
A constantly running toilet is typically due to an issue with the flush valve assembly, so one of the first parts to inspect should be the chain and flapper. If the chain is too short, then it won't allow the flapper to close properly, but if it is too long it may get trapped underneath the flapper, causing it to leak.
Increased Risk of Flooding
A running toilet can quickly turn into a flooding toilet. If you have a septic tank, all of that excess water risks flooding the tank, which can lead to the saturation and failure of your drain field.
Spending too much time on the toilet causes pressure on your rectum and anus. Because the seat is cut out, your rectum is lower than the rest of your backside. Gravity takes over, and blood starts to pool and clot in those veins. Add in any straining or pushing, and you may have a recipe for hemorrhoids.
No need to worry, a running toilet is usually a simple fix. The three most common causes are a broken or dirty flapper, too long or too short of a chain between the flush lever and the flapper or a float that is out of position.
A few blamed “boredom”, others “relaxation” and “hygiene”. But the most common response, with almost 80 percent of the vote, was that they were in there “to get some alone time”.
For most people, the normal number of times to urinate per day is between 6 – 7 in a 24 hour period. Between 4 and 10 times a day can also be normal if that person is healthy and happy with the number of times they visit the toilet.
A toilet that cuts on and off by itself, or runs intermittently, has a problem that plumbers call a "phantom flush." The cause is a very slow leak from the tank into the bowl. This problem is almost certainly caused by a bad flapper or flapper seat.
Depending on why your toilet is constantly running, you can face a number of other problems, too. A leak toward the base of your toilet can lead to serious water damage in your bathroom as the water leaks through your floor, subflooring, and more.
The True Cost of a Running Toilet
Typically, a running water toilet will waste thousands of gallons of water per month which translates to approximately $200 unnecessarily tacked onto your monthly water bill-- that's nearly $2,500 dollars a year down your toilet bowl.