For stained or discolored grout, mix two parts baking soda with one part vinegar. And if you have coarse or fragile tiles, mix two parts baking soda with one part hydrogen peroxide. If desired, you can also use a commercial grout cleaner. Use a grout brush or old toothbrush to apply the paste to the grout lines.
What do professionals use to clean grout? Whether you believe it or not, most professionals use a solution of white vinegar and water with a 1:1 ratio. This solution is often more effective than dedicated Ph-neutral grout cleaners.
Simply pour vinegar from the bottle into the cap and pour it over the dirty grout lines. Allow the lemon juice or vinegar to sit for 10 to 15 minutes. Then, scrub with a small brush or old toothbrush. Rinse the treated area and wipe dry with a towel or rag.
Grout that hasn't been sealed, needs to be resealed, or is in poor shape should not be cleaned with vinegar. The vinegar penetrates into the pores of the grout, further weakening the material. Over time, vinegar will deteriorate the condition of the grout by etching or wearing it away.
Use on most bathroom surfaces including: porcelain, ceramic tile, shower doors, sinks, bathtubs, white grout and caulk, toilet bowls, and fiberglass.
Myth: Bleach is great for deep cleaning tile and grout.
But frequent use of bleach can eventually weaken the grout's structure, causing it to become brittle and deteriorate.
First, wash your tiles and grout with sugar soap using a toothbrush and scrubbing brush. We used Selley's Sugar Soap concentrate for this, mixed with warm water in a bucket – it works a treat. Use your toothbrush, scrubbing brush and some elbow grease to scrub the grout and give it a good going-over.
Did you know that toothpaste makes an effective tile grout cleaner? To remove dirt and grime from tile grout: Dab some white, non-gel toothpaste onto the grout.
The most common and effective homemade grout cleaner is a mixture of baking soda, hydrogen peroxide, and dish soap. Cream or tartar and lemon juice is the best all-natural solution for whitening. Avoid using highly-acidic solutions like vinegar because they can corrode grout.
Cleaning Grout with Baking Soda
Baking soda is a safe deodorizer, whitener, and household cleaner—and it's an effective natural grout cleaner. Because baking soda is also a mild abrasive, using it for cleaning grout lines gives you extra firepower without the risk of scratching your tile.
I want to actually clean my grout. Magic erasers get the job done, and they do it quickly and relatively painlessly. Technique-wise, I usually cut my standard size magic eraser in half, wet it to slightly more than damp, and scrub the grout line as I squeeze gently.
Since bleach is a whitening agent, it works great to brighten grout. Add a bit of the scrubbing power of baking soda and you have a combo that can't be matched. Here's the recipe for this winning 2-ingredient cleaner: In a mixing bowl, mix ¾ cup of baking soda and ¼ cup of bleach.
Mix up a solution of about 3 tablespoons powdered oxygen bleach (something like OxiClean would work) and warm water in a 2-gallon bucket. With a sponge or cloth, swipe it around the surface until the grout lines are full. Let it soak in for at least 15 minutes, then rinse well with clean water.
The secret of the blue dawn solution is the effect of cutting grease and grime. Blue Dawn dish soap is the best multi-purpose grout cleaner you can effectively use in your home.
Time. Make a baking soda paste with water and spread over tile and grout. Leave on overnight and spray with vinegar in the morning. Follow with your regular morning shower and rinse off any baking soda/vinegar residue.
So, how do you clean grout with vinegar and baking soda? Apparently, vinegar is a popular natural household cleaner, but it's too acidic for cleaning grout. In fact, the acetic acid in vinegar can corrode the grout over time, so you might want to avoid using it for cleaning in this case.