As a general rule, most natural cleaning experts suggest mixing one part vinegar to one part water. These recommendations typically rely on distilled white vinegar as the cleaning element. If homeowners are using cleaning vinegar, they may want to add a little more water to achieve a similar amount of acetic acid.
The reason cleaning vinegar is more effective than white vinegar comes down to acidity level. The acid in vinegar is what cuts through grease and grime, removes sticky residue and fights soap scum. White vinegar has 5 percent acidity; while cleaning vinegar, on the other hand, has 6 percent.
Do You Have to Rinse after Cleaning with Vinegar? Rinsing is not necessary! If you're simply using a vinegar and water solution to wipe and disinfect, you won't need to rinse. However, if there's also plenty of dirt and grime you're wiping away, you may also want to rinse with some extra water.
Separately, both vinegar and baking soda work well for cleaning. Alone, baking soda can dissolve grease and dirt, while distilled white vinegar breaks down minerals without adding any coloring to stain surfaces (as apple cider vinegar might).
For most purposes, Harris recommends combining one part baking soda with two parts white vinegar. That combo can cut through grease and lift stains, sometimes better than store-bought cleaners, she says. Important: Never combine vinegar with bleach.
Use a 1:1 ratio of diluted vinegar and water and store it in a spray bottle. Then you can spritz and disinfect your kitchen sink, counters, or any other spots that you'd normally use bleach but want to be food-safe. To counteract the vinegar smell, you can use soapy water to rinse the sink afterward.
You should use a ratio of 1:2 baking soda to vinegar. In other words, if you're using ½ cup of baking soda, use 1 cup of vinegar, or if you're using a cup of baking soda, use 2 cups of vinegar.
Tile surfaces: To clean tile bathroom surfaces with vinegar, mix 1/2 cup white distilled vinegar with a gallon of warm water. Mop bathroom floors or scrub countertops with the solution and allow to air dry.
Grout that hasn't been sealed, needs to be resealed, or is in poor shape should not be cleaned with vinegar. The vinegar penetrates into the pores of the grout, further weakening the material. Over time, vinegar will deteriorate the condition of the grout by etching or wearing it away.
Diluted with water to about 5 percent acidity, distilled white vinegar is hailed as a natural, nontoxic cleaning marvel, killing some household bacteria, dissolving hard-water deposits, and cutting through grime at a fraction of the cost of brand-name cleaning products.
Create a mopping solution of ½ cup of vinegar and one gallon of warm water. Proper dilution is important, since vinegar's acidic, abrasive properties can have a stronger effect on some materials than others—tile being one of those. When mopping, less is more; make sure to wring out your mop thoroughly after each dip.
Vinegar is safe and milder than caustic cleaners designed for the toilet, and those commercial cleaning agents can eat away the good bacteria in your septic system. To safely and inexpensively clean your toilet bowls, pour a generous glug of vinegar, followed by a heavy sprinkling of baking soda, into the bowl.
You can use straight or a diluted vinegar cleaning solution for the bathroom to clean bacteria, especially around the toilet. Cleaning with a mixture of baking soda and vinegar in the bathroom can work really well. To clean your toilet with vinegar, pour a cup of vinegar in the toilet bowl and let sit overnight.
Vinegar is a great toilet cleaning solution. Not only is it free of chemicals and naturally antibacterial, it's also an acid, so it will remove minor lime and calcium deposits. All you need to do is pour a couple cups of vinegar in your tank and let it sit for an hour or so, then scrub and flush to rinse.
1 cup white vinegar. ⅓ cup washing up liquid. 8 drops essential oil of your choice (we like to use peppermint). This is to leave your bathroom smelling nice after the vinegar smell has faded.
Mix one part vinegar with two parts distilled water in an empty spray bottle and shake well. (If you prefer a store-bought cleaner, be sure to check out these suggestions.) Spray the surface of the shower door with the solution and let it work its magic for 10 minutes. Use a microfiber sponge to wipe away the grime.
Let the shower head soak for several hours. For an especially dirty fixture, leave it overnight. However, if you have a brass, gold, or nickel-coated shower head, remove it from the vinegar after 30 minutes. Any longer than this could damage the finish.
The mixture quickly foams up with carbon dioxide gas. If enough vinegar is used, all of the baking soda can be made to react and disappear into the vinegar solution. The reaction is: Sodium bicarbonate and acetic acid reacts to carbon dioxide, water and sodium acetate.
It is safe to leave baking soda (and vinegar) to work overnight to unclog a drain. Always flush this mixture down with boiling water—no matter how long you leave it sitting in the drain.