First, clear the floor of all items, such as baskets, towels, toilet plungers, etc. Second, sweep up any dust that collected on the floor, especially in the corners. Third, use a vacuum to remove any remaining debris. Fourth, mix warm water and an all-purpose cleaner in a bucket, and mop the floor.
Spray a disinfectant bathroom cleaner, like Clorox or Lysol, all around the bathroom sink and wipe with a cloth or sponge. Spray or wipe faucet handles with a disinfectant spray or wipe, allowing them to remain wet for the required time on the package to kill germs.
Spray the Solution: Spray white vinegar, dishwashing liquid soap and warm water solution on the shower-head and leave it for a few minutes. For a bathtub, apply baking soda and warm water paste and let it sit for 15 minutes. Scrub! Scrub!
Pour a half cup of bicarbonate of soda into and around the bowl and let it sit for at least 15 minutes. Then, apply white vinegar over the baking soda. This produces a fizzing reaction that activates the acid and can break down the most stubborn build-ups of limescale.
Step 1: Remove loose dirt and dust by sweeping/vacuuming the floor thoroughly. Step 2: Use a sponge mop or rag mop to apply the cleaning solution you have chosen on the floor. Wet the mop with the cleaning liquid and wring it out. Mop the entire bathroom floor, focusing on stained areas.
“You should always wet your shower before cleaning it unless the instructions on your cleaning product say otherwise,” Cooper says. Why? By wetting your walls, you can rinse off the dust, dirt, and other loose debris—making it easier for your cleaning products to go to work.
“Things like white vinegar, baking soda, and dishwashing soap can do just as good of a job and are more cost effective.” Baking soda is a great solution for removing rust and soap scum, especially around faucets.
Step 7: Inspection Inspection is defined as the process to ensure that the area is free of debris and dust, disinfected, has clean linen / curtains, trash and linen containers are emptied, consumable products are replenished, and no EVS equipment or supplies remain.
To get everything shiny and germ-free, expect it to take from 20 to 45 minutes to clean a bathroom. That includes cleaning and disinfecting toilets, showers, bathtubs, and more.
Once a week at least.
Tetro says your bathroom is the ultimate bacteria host; E. coli can be found within six feet of the toilet and in the sink. To keep it at bay, disinfect the toilet and sink at least once weekly, and the bathtub every two weeks — more if you shower often.
People should still flush their toilets at least once a day. "Things like to grow in urine and after a while the chlorine will inactivate in the toilet bowl water. It will being to bubble away and things will begin to grow. The odor will increase so it can get disgusting, smell bad and stain your toilet," he said.
"Be sure to scrub well with the cleaner around the inside of your bowl, the toilet bend if possible, and underneath the rim of the bowl," she explains. "Then, you'll want to let everything sit for five minutes, and flush it all away."
He added that they tested the sink and the toilet seat and found that these places are unexpectedly clean, with the toilet sink ranking as the cleanest spot so far. According to Gerba, a sanitary surface has no more than 1,000 bacteria per square inch that is something clean enough to eat off.
Daily: Flush your toilet every day (even if it's not in use) to discourage the growth of bacteria. Weekly: Deep-clean your toilet once a week or biweekly—this includes the toilet bowl, exterior and toilet seat. Yearly: Clean your toilet tank twice a year.