And in case you slept through chemistry, putting your pan in the dishwasher will cause your cast iron to rust over time. “Water and cast iron are not friends. Even the smallest amount of water will cause rust, which is why it's important to immediately dry cast iron after washing,” La Forge says.
Using soap will not ruin your pan. It is totally fine on enameled cast iron, and on plain cast iron, too. It's not going to destroy your seasoning. With enameled cast iron, you're done: Wash and dry.
Pour 1 cup kosher salt into a still-warm cast iron skillet. Use a paper towel or folded kitchen towel to scrub the pan with the salt until the pan appears clean. (The salt will be nearly black.) Rinse out the pan, and dry it.
The reason given for this rule is that if you were to use soap, it would strip the cast iron of its “seasoning.” Seasoning is a layer of polymerized oil that's baked into all cast-iron cookware. It's what gives a cast-iron skillet a non-stick (really more like an “easy-release”) surface.
Clean cast-iron skillet after every use
Wipe interior surface of still-warm skillet with paper towels to remove any excess food and oil. Rinse under hot running water, scrubbing with nonmetal brush or nonabrasive scrub pad to remove any traces of food. (Use small amount of soap if you like; rinse well.)
If cast iron is left in the sink to soak, put in the dishwasher, or allowed to air dry, it will rust. It can also happen when you store your cookware in moisture-prone environments, such as a cabinet near a dishwasher, an open cabinet in a humid location, or stored outside.
Why can't you boil water in cast iron? When you have water at a constant boil in seasoned cast iron, the boiling causes the seasoning to release. This can leave patchy seasoning or an uneven layer of seasoning left on your cast iron.
Avoid using the dishwasher, soap, or steel wool, as these may strip the pan's seasoning. Scrub off stuck-on bits: To remove stuck-on food, scrub the pan with a paste of coarse kosher salt and water. Then rinse or wipe with a paper towel. Stubborn food residue may also be loosened by boiling water in the pan.
You can boil water in cast iron for cleaning.
Soaking the pan will wear down the seasoning and can cause rust to form. But, you can boil water for up to 10-15 minutes to loosen up baked-on food. Sometimes you can even use the liquid for a sauce – as long as you don't clean with soap! This process is called deglazing.
Use a fine grade steel wool pad and scrub the pan surface, inside and out, to remove rust and debris. Wash the residue with hot water and mild soap if needed. Once you have cleaned all the residue off the cast iron skillet, wash and dry your skillet as noted.
Using vinegar mixed with water is one of the best iron cast cleaner methods you can employ to get rid of unwanted rusting on your pans. So, if you find yourself stuck with rust, pull out the vinegar and have it shining like new again in no time!
Here's how you clean a cast iron skillet, according to La Forge: While the pan is still warm (but not hot!), use mild dish soap to clean the pan. To get rid of the stuck-on pieces, use a pan scraper, a non-abrasive sponge, a stiff-bristled nylon brush, or a chainmail scrubber.
You can generally use whatever oil you prefer, as long as the cooking temperature is below the smoke point of the oil. Olive oil, vegetable oil, sunflower oil, and grapeseed oil are all great multipurpose cooking oils—you can use them for everything from sautéing to baking.
Don't overheat it. Sticking your skillet into a roaring fire might seem like a good way to heat it up in a hurry, but overheating or uneven heating can cause your skillet to take on a permanent warp, or even crack. Same goes for pouring cold water into a red-hot pan. Don't do it.
You'll need to follow a curing routine after each use, until your pan builds up an oil coating. Cast iron is vulnerable to rust if it's submerged in water for too long. There's advice that says you should never submerge cast iron in water and only wipe it out.
Heat to Alter Metal
Brass, steel, iron copper and silver can all be made weaker by heating the metal to a set temperature and cooling it slowly. It's not only used to create softer metal products but also more electrically conductive ones. However, it would be incorrect to state that heat always makes metal weaker.
Cast iron pans can leach a sizeable amount of iron into your food, exceeding dietary intake in some cases. Acidic foods will contribute to much more leaching while an old, heavily-seasoned pan will leach much less iron than a newer one.
The black residue on a cast iron skillet isn't harmful; it's just a part of cooking with a cast iron pan. A black seasoned coating shouldn't rub off easily or affect the food, as it should form a useful non-stick surface for cooking. If residue starts to build up, however, this can affect your cooking.
Even though a rusted cast-iron pan doesn't necessarily present a health concern, it's still not recommended that you cook on it. The rust might add an unpleasant metallic flavor to your food. Plus, it makes using the skillet much more difficult.
WD-40 Specialist® Rust Remover Soak quickly dissolves rust and restores tools, equipment, and surfaces to bare metal without chipping, scraping or scrubbing. Great for removing rust from tools, metal, cast iron, chrome parts, and more without harming paint, gaskets, trim, or other surrounding parts.
Submerge your rusty cast iron cookware ensuring it is fully covered in Coke. Allow to soak for 12 - 24hrs depedning on the rust coverage. Rinse the Coke off with clean water. If needed, use a sponge to wipe off excess rust then dry with a clean cloth.
Should I Oil My Cast Iron After Every Use? After each use, to get the most out of your cast-iron skillet, it is best practice to apply a thin layer of oil on the surface. Regularly oiling your cast iron skillet will provide a protective layer to the surface and help keep it from rusting.