A green flashing light on airpods can sometimes represent issues with charging, especially if the airpods are not present in the case. Some of the reasons include fault with charging cable, power source issue, or damaged charging case. We recommend you try charging the case using a different power source or cable.
If you find your AirPods flashing green and not connecting, resetting them should be your go-to troubleshooting. Resetting your AirPods means they'll return to the default state like they're out of the box. Additionally, resetting should fix any settings, software, or pairing-related issues.
If your AirPods are in your case and the lid is open, then the light shows the charge status of your AirPods. When your AirPods aren't in your case, the light shows the status of your case. Green means fully charged, and amber means less than one full charge remains.
"If your AirPods are in your case and the lid is open, then the light shows the charge status of your AirPods. When your AirPods aren't in your case, the light shows the status of your case. Green means fully charged, and amber means less than one full charge remains."
Make sure that your iPhone or iPod touch has the latest version of iOS or that your iPad has the latest version of iPadOS. Put both AirPods in the charging case and make sure that both AirPods are charging. To make sure that Bluetooth is on, go to Settings > Bluetooth.
On your device, go to Settings > Bluetooth, then turn on Bluetooth. Open the case with your AirPods inside, then hold it next to your device. Follow the onscreen instructions, then tap Done.
The key areas include the multifunction button, charging port, and the text below the hinge. Other obvious signs of fake AirPods: blue light on the charging case or any light in the earbuds. AirPods status light can't produce blue light, and the earbuds don't have LED inside them.
Charge Your AirPods
Resetting your AirPods takes a bit of battery power. So if your AirPods are low on charge, they might not have enough energy to reset. That's why it's essential to make sure you fully charge your AirPods before you attempt to reset them.
AirPods typically last about 2-3 years before most users feel the need to replace them. This short lifespan is because of their lithium-ion batteries. AirPods have proven tough in several durability tests and have shown that they can withstand pressure.
The troublesome AirPod might not activate the amber “charging” light if it doesn't make a connection. So take it out, and put it back in, a couple times, until re-insertion finally activates an amber light. You may need to clean the contacts inside the case with a cotton swab.
If you have AirPods Pro (1st or 2nd generation) or AirPods (3rd generation), you can tap the case when it's on the charging mat to see whether your AirPods Pro or AirPods (3rd generation) are charging (amber light) or fully charged (green light).
Similarly, a green light on the earbuds is also an indication of fake AirPods. That's because AirPods and AirPods Pro earbuds themselves do not emit any light. The status light for genuine AirPods is located on their charging cases.
When you charge your AirPods with charging case, you'll get the best, fastest results by using an iPhone or iPad USB charger or plugging into your Mac. Repeatedly opening and closing the charging case can reduce the battery charge of the case.
Previously paired AirPods can still work if you have a dead case, provided the earbuds themselves have sufficient charge.
Make sure that your AirPods are charged. Close the lid, wait 15 seconds, then open the lid. The status light should flash white. If the status light doesn't flash white, press and hold the setup button on the back of the case until you see the status light flash white.
Check your headphone cable, connector, remote, and earbuds for damage, like wear or breakage. Look for debris on the meshes in each earbud. To remove debris, gently brush all openings with a small, soft-bristled brush that's clean and dry. Firmly plug your headphones back in.
Flashing amber: there is a problem with your AirPods, AirPods 3 or AirPods Pro. You need to factory reset them and then re-pair them to your device. The best solution for anybody experiencing connectivity issues with their AirPods is to factory reset them.
If you find that the case isn't charging, the first thing you should check is the cable you use to charge it. Inspect it for damage, and try using a different cable if that's an option. Also attempt to use a different power brick if you can, as this will help you eliminate the possibility that the cable is the culprit.
Apple's original AirPods, AirPods 2, AirPods 3, and AirPods Pro all have a reset function that returns them to their factory settings. This can come in handy if you're handing down the wireless earphones to someone else or you're having any sort of problem with them.