Cleaning your toilet tank is pretty quick and easy with vinegar and baking soda. You only need to do it once or twice a year, and it can help get rid of bacteria, mold, and mineral deposits to keep you and your family healthy.
Odor Toilet Tank FAQ
White vinegar and baking soda in equal parts is a cost-efficient and effective means of getting rid odors in a toilet. Add them to the tank, mix them in and then use the toilet brush to gently scrub the tank. Let it sit for a few hours, scrub the tank again and flush.
If there is sediment in the bottom of the tank, you'll need more than a quick clean. Empty the tank and add enough undiluted distilled white vinegar to fill the tank to the regular water level. Allow the vinegar to work for at least two hours or overnight.
Toothpaste can be used to keep your toilet cistern smelling fresh.
The carbonic acid that is in coke is what helps to clean toilet stains. Picture the acidity slowly working its way through the stains, melting them away. It can take a while depending on how stubborn the stain is which is why it's vital to have a suitable cleaning method depending on how bad the toilet condition is.
To prevent calcium carbonate from piling up into your cistern, pour a single cup of white vinegar into it. The mixture should be three parts white vinegar to one water. After you pour it into the cistern, mix it slowly and carefully until it's evenly distributed.
Vinegar will not damage your toilet in any way if it's left in your toilet overnight. In some cases, leaving the vinegar in your toilet overnight is recommended to get the best cleaning results. No matter what material your toilet is made from, the vinegar will not damage your toilet.
Use an automatic toilet bowl cleaner.
It will clean your toilet automatically from the inside out with every flush, eliminating and preventing the growth of bacteria and hard water stains on it's journey to the bowl. Also, it will prolong the time your toilet stays clean.
Also, make a simple routine part of your weekly cleaning: Sprinkle the toilet with cup of baking soda. Let it sit for 30 minutes, then spray or squirt with vinegar (a mild acid) to moisten. Scrub with a bowl brush and flush away [source: Niagara County].
If the clog still seems to be intact, start over at step 1 and repeat the process a couple of times. For extra-stubborn clogs, you can let the fizz mixture sit overnight or combine this method with plunging.
I still eyeball it most days, but for maintenance, I use about a teaspoon each of baking soda and citric acid, and when I wanted a deeper clean, with the initial stubborn mineral deposits, I used about three tablespoons. I hadn't realized how much my stained toilet bothered me until it was restored.
Cleaning professionals and plumbers recommend cleaning with vinegar to remove buildup and stains from toilet tanks and other surfaces. Mix it with baking soda, however, and you could damage your tank and plumbing.
In this case, a basic toilet cleaning product may not be enough, and you will need to use undiluted bleach. As a one-stop cleaning solution, pour one cup of bleach around the bowl. Then tackle every inch with a toilet brush or a handheld scrub brush. Let it sit for five minutes, then flush.
Vinegar and baking soda produce that oh-so-familiar chemical reaction that powers through buildup and loosens tough stains. While it might seem like it's chewing its way through grime, it's not powerful enough to damage the porcelain finish of the toilet bowl.
If you take a plastic bottle, put a few pebbles or rocks in it, fill it with water, and then place it in the back of your toilet, you can save up to 10 gallons of water per day. By placing the bottle in the toilet tank, less water is needed to fill the tank and therefore less water is being flushed.
Water concerns in the 70s and 80s led many to try to conserve on their own. One of the more novel ideas was to place a brick (yes, an actual brick) inside the toilet tank: doing so displaces water — about half a gallon — making each flush use less of it.
Chances are these issues are caused from a mineral in your water called manganese. Seeing manganese stains from your water isn't an emergency, but at high levels, it can have an effect on the quality of your drinking water, laundry, appliances and plumbing.
While it can be put to a number of helpful uses around the home, WD 40 is particularly good at softening rust and limescale deposits in the toilet (and bathroom). All you have to do is spray it on the desired section of the toilet, wait a few minutes, then scrub it away with a toilet brush.
Use Coke specifically when you need to remove problem stains like limescale or rust. If you want to avoid the risk of tinting your toilet with Coke, a light-colored carbonated soft drink such as 7UP or tonic water will also suffice.
Tips for Cleaning the Inside of the Toilet Tank
All you need to do is pour a couple cups of vinegar in your tank and let it sit for an hour or so, then scrub and flush to rinse. But if you don't feel like something is clean unless the fumes of chemicals burn your nose, then bleach is a good one to use.
It'll run down and mix with the water, but leave behind an invisible layer of acid residue. The hardest part is letting the Coke work its magic. The longer you leave the acid, the better. An hour is the bare minimum, with overnight being the best.