Not enough water It could just be that the tank water level is set for too low a level – because for a proper flush, the water should be almost all of the way to the top of the tank. If it's too low, it will flush – but not sufficiently.
If your toilet isn't flushing all the way, it's most likely because of one of these problems: The water level in your toilet tank is set too low. Problems with your flapper. A clog in the toilet, flange or drain.
If water is rising in the bowl immediately after you've already flushed, that means a clog is blocking the water from moving through the toilet drain. If you flush again, there will be even more water that's unable to make it past the clog, and you'll end up with even more flooding from the toilet bowl.
If your toilet is struggling to complete a flush, there are several possible solutions, including clearing a clog, adjusting the refill valve, fixing the flapper, cleaning the inlet holes, replacing an outdated model, or addressing a broader plumbing problem.
There are a few different reasons why your toilet might be resisting your attempts to flush. It could be a blockage, it could be a problem with the flushing mechanics, it could be a water supply problem or it could simply be a broken handle.
For preventive drain cleaning, you can use Drano® Max Build-Up Remover in drains, toilets and even septic systems. Apply Drano® Max Build-Up Remover overnight or before you go to work, then wait 6 to 8 hours before running warm (not hot) water down treated drains or flushing treated toilets.
When a toilet has a clog made of water-soluble materials, it has a chance of slowly dissolving in the water and freeing up the toilet to work properly again. So, clogs that are primarily made of toilet paper can clear themselves.
When the water is extremely hot, but not boiling, pour into the toilet carefully. Wait for 10-15 minutes while the dish soap and hot water soften the clog. Once you do so, the toilet will unclog and flush freely.
Unblocking a toilet with baking soda and vinegar
A baking soda-vinegar mix can clean and descale pipes as well as remove soap residue, making it an all-round bathroom cleaner. Firstly, pour half a cup of baking soda into your toilet bowl and then pour half a cup of white vinegar on top of it.
Baking soda and vinegar is a marvelous cleaning agent, and when dumped into a clogged toilet, often will break up the clog without you having to do a thing. This is what you want to do: combine two cups hot water with two cups white vinegar.
To unblock a toilet, mix it with white vinegar and water to start a chemical reaction. This mixture is great for cleaning, descaling and removing soap residues. It's also a really effective way of deodorising waste pipes.
Check the water valve
There should be a water valve located along the pipe which is most likely placed near the floor or the wall. Make sure that the water valve is turned on. You can adjust the valve to your desired amount of pressure on water flow to the tank. Turn the valve on to its full extent for faster flushing.
Cola Drain Cleaner Trick
Allow a two-liter bottle of soda to come to room temperature. Pour the entire bottle down the clogged drain. Allow it to sit in the drain for at least an hour or two (or even up to 24 hours for stubborn clogs). Flush drain with boiling water.
For extra-stubborn clogs, you can let the fizz mixture sit overnight or combine this method with plunging. If your toilet remains clogged or continues to get clogged, this may be an indication of plumbing problems such as mineral buildup or pressure issues.
For particularly stained or foul tanks, turn the water valve off, flush the toilet until the tank is empty, and fill the tank with just vinegar (no water), letting it sit overnight.
Use Vinegar, Baking Soda, and Hot Water
Just like with clogged kitchen sinks, these three products can work wonders when dealing with clogged toilets. All you need to do is pour a cup of baking soda, 4 cups of boiling water, and a cup of vinegar into the toilet.
If the clog is severe, pour up to one-half a cup of baking soda in the toilet. Remember to use equal parts of vinegar and baking soda. So, for every one cup of baking soda you use, use one cup of vinegar. Pour the baking soda first, then pour an equal amount of vinegar.
Baking soda and vinegar, when mixed together, can form a chemical reaction that looks sort of like an eruption. This chemical reaction can help clear your toilet and any pipe clogs that you might have.
Who it isn't for: People who are dealing with toilet clogs or those who would rather use a natural drain cleaner. Experts agree: Drano Max Gel is the best overall drain cleaner because it works quickly to get rid of tough clogs.
Baking Soda Mixture
As an alternative to using dish soap for those situations where you're without a plunger, try this all-natural solution. Pour one cup baking soda and two cups vinegar into the toilet. Allow it fizz for a half hour. If clog doesn't dissipate, try the hot water trick.
It's pretty simple — just like they do on food particles that are stuck to your dishes in the sink, the combination of hot water and dish soap help to dissolve and break up whatever it may be that is lodged in the toilet, causing a clog. This handy tip is great should you find yourself in a pinch.
Dishwasher tablets are meant to dissolve hard water stains, so they're the perfect solution for cleaning toilets. Besides cleaning dishes and toilet bowls, you can use dishwasher tablets for a few more cleaning projects around the house.
What I recommend, that works well is distilled white vinegar. As far as your toilet to keep it clean inside the bowl. Use 1 cup of white distilled vinegar and poor inside your toilet tank, also pour half of that cup in to the overflow, which is the small, round pipe that stands up in the middle of the tank .