Should you see any limescale or discoloration of any kind, your rim jets are clogged and need to be cleaned for proper function. There's no need for rubber gloves, scrubbing and harsh chemicals, you can naturally clean the rim jets with white vinegar.
Use a solution of one part bleach to ten parts water. Let it sit about five minutes in the overflow tube, then flush the toilet. Then put on some gloves and use a piece of wire to clean out each jet. When all the jets are clean, scrub around them with a bleach-compatible cleaner.
While it can be put to a number of helpful uses around the home, WD 40 is particularly good at softening rust and limescale deposits in the toilet (and bathroom). All you have to do is spray it on the desired section of the toilet, wait a few minutes, then scrub it away with a toilet brush.
When cleaning a toilet bowl, WD-40 works by softening the rust and lime deposits, so they can be easily wiped away. You don't need to use much of it. Simply spray on the affected area, wait a minute or two and brush it away with a regular toilet brush.
If the outside of the fill valve has calcium and mineral build-up; clean the valve by using vinegar and an old tooth brush to dissolve and break off the build-up on the surfaces of the fill valve. Then wash valve with warm soapy water and then rinse with fresh water.
Because water deposits build up under a toilet's rim, it can take only 24-48 hours for colonies to start breeding. As it grows, you will see what looks like black debris or rings inside the bowl. This can cause respiratory problems for people as the mold and mildew release tiny spores into the air.
3. Don't leave CLR for longer than two minutes. Again, CLR is acidic, which makes it effective, but also means it can cause damage if left in contact with surfaces for too long. Always rinse away with cool water after two minutes of contact.
You can clean toilet stains with a toilet brush, baking soda, and white vinegar. Household cleaning ingredients like Borax or a wet pumice stone can also scrub away tough mineral stains.
Vinegar is a great toilet cleaning solution. Not only is it free of chemicals and naturally antibacterial, it's also an acid, so it will remove minor lime and calcium deposits. All you need to do is pour a couple cups of vinegar in your tank and let it sit for an hour or so, then scrub and flush to rinse.
Green or brown stains are a sign of lime buildup. It happens because of the evaporation of hard water that leaves behind mineral deposits. These minerals dry out and catch other dirt and bacteria around the buildup, creating layers of green and brown stains.
Baking soda and vinegar, when mixed together, can form a chemical reaction that looks sort of like an eruption. This chemical reaction can help clear your toilet and any pipe clogs that you might have.
Mineral Deposits on Your Water Supply
Your water supply can be among the top culprits behind a black ring. When hard water flushes the toilet, mineral deposits start to accumulate over time. This is because hard water brings all sorts of minerals, including iron, magnesium, and calcium.
You can use straight or a diluted vinegar cleaning solution for the bathroom to clean bacteria, especially around the toilet. Cleaning with a mixture of baking soda and vinegar in the bathroom can work really well. To clean your toilet with vinegar, pour a cup of vinegar in the toilet bowl and let sit overnight.
The carbonic acid that is in coke is what helps to clean toilet stains. Picture the acidity slowly working its way through the stains, melting them away. It can take a while depending on how stubborn the stain is which is why it's vital to have a suitable cleaning method depending on how bad the toilet condition is.
So instead of purchasing those expensive fizzies or abrasive toilet bowl cleaners, head to the fridge and let the carbonation of Coke work its magic on filthy rings, lime buildup, and water stains. Because Coca-Cola contains carbonic, citric, and phosphoric acids, it's great for tough stains and dissolving rust.