Vinegar will not damage your toilet in any way if it's left in your toilet overnight. Regardless of your toilet's material, the vinegar is not strong enough to damage the toilet or the toilet's plumbing. So, you can leave the vinegar in your toilets overnight without worry.
Vinegar is safe and milder than caustic cleaners designed for the toilet, and those commercial cleaning agents can eat away the good bacteria in your septic system. To safely and inexpensively clean your toilet bowls, pour a generous glug of vinegar, followed by a heavy sprinkling of baking soda, into the bowl.
Option 1: Use Vinegar and Baking Soda
Vinegar and baking soda produce that oh-so-familiar chemical reaction that powers through buildup and loosens tough stains. While it might seem like it's chewing its way through grime, it's not powerful enough to damage the porcelain finish of the toilet bowl.
After you've poured the vinegar into your toilet, leave it to work its magic for 3-4 hours. If your limescale is particularly bad you can leave it overnight.
Vinegar and baking soda are fine to flush down your toilet.
To clean off your toilet brush, leave it in the toilet as you flush. The new, clean water will rinse the brush off, and you can let it dry until you use it next time.
You can use straight or a diluted vinegar cleaning solution for the bathroom to clean bacteria, especially around the toilet. Cleaning with a mixture of baking soda and vinegar in the bathroom can work really well. To clean your toilet with vinegar, pour a cup of vinegar in the toilet bowl and let sit overnight.
Whilst the right solution is a completely safe, natural, and vegan-friendly cleaner for your floors, you do have to be careful with how you use it. This is because too much exposure to strong vinegar could strip away the finish on your porcelain.
"The biggest don't when it comes to toilet tanks is bleach—do not use bleach or products containing bleach inside the tank, as it can corrode the internal parts of your toilet. If you are aiming to remove tough stains from the tank, I also recommend white vinegar diluted with water."
Add 1/2 cup vinegar to the toilet bowl, let stand a few minutes, brush, and flush. If you have hard water, let the vinegar sit for an hour, and you may have to do some light scrubbing. To remove stains, add 1/2 cup borax to the water, swish it around, and let it soak overnight.
Pour about one cup of white vinegar into the toilet bowl, followed by about one cup of baking soda, then let it rest for around 10 minutes. It's a good idea to wear gloves when using this as a toilet cleaner and to have eye protection.
Over time, porcelain toilets can develop stains. It may be tempting to use bleach, hydrogen peroxide, and the like, but it's best to avoid these cleaning agents as much as possible. It's not likely that the chemical compounds above will crack your porcelain toilet, but they can damage the finish of the porcelain.
Sprinkle baking soda liberally onto the toilet bowl stains. Use your toilet brush to scrub the stains and create a paste all over the inside of the bowl. Let the mixture sit for 10 minutes to work on the stain and whiten the porcelain.
Let the Solution Sit
Let the vinegar and soda solution sit for up to 30 minutes. If there are any stains above the water line, it would be helpful to go over them with your toilet brush one or two more times. One final scrub before you flush should remove any still stuck stains. Flush to rinse.
Homemade Toilet Bowl Cleaner With Dawn & Vinegar
In an old dish soap bottle, combine 1 cup vinegar with 1 cup Dawn. Squirt the mixture onto the toilet. Allow it to sit for 15-30 minutes. Scrub and flush.
If you notice a visible black or red ring, you need to clean under the rim of your toilet as soon as possible, according to Eve's House Cleaning. To give your toilet rim a good deep clean, apply bleach or vinegar to the stain, and then use a toothbrush or cleaning brush to scrub away the germs and build-up.
Cleaning your toilet tank is pretty quick and easy with vinegar and baking soda. You only need to do it once or twice a year, and it can help get rid of bacteria, mold, and mineral deposits to keep you and your family healthy.
The contaminants notorious for causing brown stains in toilet bowls are iron, manganese and sulfur. These pollutants can also produce iron bacteria, manganese bacteria and sulfur bacteria, which also can produce brown stains.
Professional cleaners often use the same household supplies as you would: toilet-bowl cleaner (or bleach), disinfectant wipes, rubber gloves, as well as a nonscratch scrub sponge, a microfiber cloth, or paper towels. A handheld scrub brush or a pumice stone can get to especially tough stains.
Using either disinfecting wipes or a combination of disinfecting spray and a rag, paper towels, or a sponge (that you reserve just for this task), wipe down all of the external surfaces of the toilet, paying special attention to any areas you touch regularly such as the seat and the flushing handle.
Grout that hasn't been sealed, needs to be resealed, or is in poor shape should not be cleaned with vinegar. The vinegar penetrates into the pores of the grout, further weakening the material. Over time, vinegar will deteriorate the condition of the grout by etching or wearing it away.
Baking Soda, Vinegar, and Essential Oil Cleaning Method
Vinegar is safe to use on porcelain as long as you don't leave it on too long. This method can help clean yellowed porcelain.
Do not use cleaning products that contain acids or ammonia (and other harsh chemicals) as these can damage grout and glazed surfaces of the tile. Choose products that are compatible with your grout to avoid damage or discoloration of the grout. Always dry your porcelain thoroughly after cleaning.
For extra-stubborn clogs, you can let the fizz mixture sit overnight or combine this method with plunging. If your toilet remains clogged or continues to get clogged, this may be an indication of plumbing problems such as mineral buildup or pressure issues.