ANSWER. ANSWER - It is possible to grout over existing grout if there is enough depth to do so. 1/8 inch depth may or may not be adequate depending on the type of grout used. A latex modified grout may work, but you have to properly clean the existing grout to ensure the new grout adequately bonds.
Spray grout with equal parts vinegar and warm water.
Fill a spray bottle with a half-and-half solution of vinegar and warm water. Spray the mixture on the grout, let it stand for 5 minutes, then scrub the surface with a stiff brush.
First, wash your tiles and grout with sugar soap using a toothbrush and scrubbing brush. We used Selley's Sugar Soap concentrate for this, mixed with warm water in a bucket – it works a treat. Use your toothbrush, scrubbing brush and some elbow grease to scrub the grout and give it a good going-over.
Vinegar is often recommended to be a grout cleaning home remedy, but The Grout Medic never recommends using anything acidic or alkaline to clean your precious grout and tile. You should also forego the traditional scrubbing and scouring, which also promote grout deterioration over time.
What's the best homemade grout and tile cleaner? Mix together 1/2 cup of baking soda, 1/4 cup of hydrogen peroxide, and 1 tsp dish soap. Apply cleaning mixture onto the grout, wait 5-10 minutes, scrub, sweep up the excess baking soda, and rinse.
Method 2: How to Get Grout White Again with Lemon Juice or White Vinegar. Saturate the grout with lemon juice, a mild disinfectant that gets rid of grout stains naturally. You can also use white vinegar for chemical-free grout cleaning.
Regrouting a shower is more cost-friendly than replacing shower tiles entirely. It's worth regrouting a shower that needs a little TLC because grout helps protect your bathroom from mold and mildew.
epoxy grout is a great choice when you are ready to re-grout a tile project. Because epoxy grout is so much stronger than other types of grout (particularly cement grout), you won't even need to remove all of your old grout. You can apply new grout right over the top of the old grout.
When Should You Regrout Your Tile? Grout doesn't last forever. You can expect a lifespan between eight and sixteen years. Its lifespan will vary depending on how you treat your shower.
However, you must make sure you are re-grouting with the same type of grout you originally used. If not, the second layer will not adhere well to the first and you will have to do the same job over again in a few months' time.
Grout that hasn't been sealed, needs to be resealed, or is in poor shape should not be cleaned with vinegar. The vinegar penetrates into the pores of the grout, further weakening the material. Over time, vinegar will deteriorate the condition of the grout by etching or wearing it away.
You don't even need to fully remove all the old grout before you put a new layer of grout on, if you do the proper work to prepare it. While you absolutely will have to remove some of your existing grout, with a little grunt work and some solid preparation, you can get this job done in a weekend.
Baking soda is a safe deodorizer, whitener, and household cleaner—and it's an effective natural grout cleaner.
From whitening discoloured surfaces to buffing layers of household grime, toothpaste will completely refresh tile grout for a new look.
The easiest way to clean grout without scrubbing involves hydrogen peroxide and baking soda. Mix the two into a paste with some dish soap and apply to the grout lines. Alternatively, you can use a cleaning solution of water, vinegar, lemon juice, and baking soda.
Little did you know that cola is great for cleaning tile grout! If you have dirty, dingy grout, pour a bit of cola onto the area, let it sit for a few minutes, and wipe clean. For tough stains, use a cleaning toothbrush to scrub the grout before wiping the area clean. Cola Cola can also be used on carpet stains.
Avoid Vinegar and Baking Soda
Vinegar and other acids are also a bad idea for stone tile because the acid can etch the stone. Another widely praised household cleaner, baking soda, is alkaline (not acid), but it is not very effective as a grout cleaner.
In a large bowl, combine 2 cups of water, ¼ cup of vinegar, and ¼ cup of lemon juice into ½ cup of baking soda. Scoop the mixture over the grout lines. Let it sit for 10-15 minutes. If needed, lightly work the mixture into the tile grout using a toothbrush.
The vinegar combined with the baking soda will create a bubbly reaction, which will get rid of soap scum, limescale and mould. Be sure to work the baking soda into the grout lines, removing all build-up.