A screwdriver and metal rod
If you have a screwdriver and a metal rod, you can try to get your car door unlocked as well if you don't have the keys. Use the screwdriver to open some space and then take the metal rod and push into the lock to see if it opens.
An option for getting into your car if your keys are locked in it is to have a locksmith make a new key for the car. One of the best ways to accomplish this is to provide the VIN or Vehicle Identification Number to the locksmith. Using the VIN, the locksmith will be able to make a new key that will fit the lock.
Yes, there are ways to pick a car door lock, but they usually take some skill and practice. A common method involves using a bobby pin.
Slim jims are used to unlock automobile doors without use of a key or lock pick. It acts directly on the levers and interconnecting rods that operate the door, completely avoiding the complexity of dealing with the lock mechanism itself.
Plastic Card Method
Find a rigid plastic card and slide it between the door and the door jamb. Gently wiggle the plastic card around the gap until it's level with the strike plate. Press the latch and continue pushing in the card to depress the latch and then push the door open.
Wrong Key. What kind of key doesn't open a door? Sent by: Age: Monkey.
To open a door with a credit card, start by sliding the card in the gap between the doorknob and the frame. Then, bend the card toward the doorknob. Next, bend the end of the card back toward the frame, which will cause the card to slip under the latch and unlock the door.
A slim jim, otherwise called a lockout tool, is a car tool commonly issued to police officers to help open doors with manual locks. It's used by wedding into the door mechanism itself, between the window and the weather stripping, hooking the locking pin, and pulling it from the inside.
Sadly, you can not pick a lock using a single screwdriver. Screwdrivers are too large to fit into most keyways and will do a poor job manipulating the internal components of the lock. HOWEVER! Lock picking requires two different types of tools—a lock pick and a turning tool.