SSID is simply the technical term for a Wi-Fi network name. When you set up a wireless home network, you give it a name to distinguish it from other networks in your neighbourhood. You'll see this name when you connect your devices to your wireless network. WPA2 is a standard for wireless security.
You can't make your SSID secure, as it is only an identifier of your Wi-Fi network. Rather, you should make your Wi-Fi network secure by creating a strong Wi-Fi password, using strong encryption such as WPA2 or WPA3, and enabling your router's firewall.
Look for a sticker on your router.
Many routers provided by Internet Service Providers have a sticker on the bottom or side, listing the default SSID. This is usually labeled as the SSID or "Network Name" and may be located next to a barcode.
On Microsoft Windows
2. Type in the command “NETSH WLAN SHOW PROFILE” and press Enter. 4. In the Security settings, you will find your WPA2 password under the "Key Content" section.
The SSID is the name of your wireless network. This is what you will look for when connecting wireless computers and devices. The Password is the secret word or phrase you will enter when first connecting a device to your wireless network. Each computer or device you connect will need to use this password.
The term SSID may sound complex, but it's just the technical term for a network's name. Whether you're connecting to a WiFi network at home or the shopping mall, it has an SSID. When you tap and hold the WiFi icon on your device, you'll see a number of network names or SSIDs in your area. SSID is a unique network name.
SSID stands for Service Set IDentifier and is your network's name. If you open the list of Wi-Fi networks on your laptop or phone, you'll see a list of SSIDs. Wireless router or access points broadcast SSIDs so nearby devices can find and display any available networks.
The WEP key or WPA/WPA2 preshared key/passphrase is not the same as the password for the access point. The password lets you access the access point settings. The WEP key or WPA/WPA2 preshared key/passphrase allows printers and computers to join your wireless network.
For Windows 10
Click Manage known networks. Click the current wifi network your are connected to, and click Properties. Next to Security type, if it says something such as WEP or WPA2, your network is protected.
Like its predecessor, WPA2 was designed to secure and protect Wi-Fi networks. WPA2 ensures that data sent or received over your wireless network is encrypted, and only people with your network password have access to it.
Your router brand plays some part in what name your SSID displays. To borrow from our Starbucks example, an SSID could be “Starbucks_2735”, “RoamWiFi007”, and so on. Many branded wireless routers come with a default SSID, so it's usually best to change your SSID from the default to avoid confusion from similar names.
Is the SSID the same as the IP address? No, the SSID is not the same as the IP address. It is the name of your wireless network, while the IP address is a unique identifier assigned to each device on a network.
Has your computer been asking you to enter your network security key? If so, you may not know where to find it. Usually, your router has a sticker that lists the Wireless Network Name, also known as a SSID, and the Wireless Security Key Password, which is your network security key.
The first, most common, username is actually your SSID (your router's name). The second is the username you'll need to access your router's settings.
Wi-Fi Protected Access Version 2 (WPA2): WPA2 is an advancement of WPA and contains an even higher level of security encryption for wifi networks. WPA2 uses the Advanced Encryption Standard (AES) which is also used by the U.S. government to protect classified documents.
Select the Wi-Fi network icon on the right side of the taskbar, then select Properties underneath the Wi-Fi network name. On the Wi-Fi network screen, under Properties, look at the value next to Security type. It will include WPA3 if you're connected to a network using WPA3 encryption for security.
What you should instead by looking for is if the device has support for WiFi 802.11 b, g, n or ac. WPA2-Enterprise uses IEEE 802.1X, which is supported by most WiFi 802.11 b, g, n and ac devices, but not devices that only support WiFi 802.11a, which basically means almost every device you look at will be good to go.
Your device is in airplane mode or has Wi-Fi turned off. Your router is down. You're entering an incorrect Wi-Fi password. Your laptop is too far from your router.
WPA2 was created to be better, faster, and more robust than the original WPA. While WPA still utilises TKIP, it also uses the AES (Advanced Encryption Standard) algorithm, a more complex encryption protocol. Since 2006, WPA2 has been a regular feature on all verified Wi-Fi hardware.
If you don't have the network name (SSID), you can use the BSSID (Basic Service Set Identifier, the access point's MAC address), which looks something like 02:00:01:02:03:04 and can usually be found on the underside of the access point. You should also check the security settings for the wireless access point.
Check your network adapter SSID
Check that your wireless network adapter's SSID is available and what its status is. If your Network Adapter reads “Not Connected,” click “Connect.” If you can't connect to your network, you may need to debug your wireless network settings (an advanced, technical troubleshooting issue).
Home networks don't require the use of a visible SSID unless the network uses several different access points that devices roam between. If your network uses a single router, turning off this feature is a trade-off between the potential security benefits and a loss of convenience in setting up new home network clients.