Back framing is the process of framing decorated ceilings, or more commonly framing around bulkheads, pipes or posts to cover them with drywall. Back framing is the final touch of the rough framing stage, but a necessary part of any new home or renovation.
Modern wood framing essentially includes three types: balloon, platform and semi-balloon framing. With long lumber lengths, vertical load-bearing framing studs run continuously from foundation to roof.
Building framing is divided into two broad categories, heavy-frame construction (heavy framing) if the vertical supports are few and heavy such as in timber framing, pole building framing, or steel framing; or light-frame construction (light-framing) if the supports are more numerous and smaller, such as balloon, ...
In production building, it's called “pick-up framing”—a dedicated crew follows behind the house framers installing blocking in all the right places. Custom builders have to work the same process into their schedules.
The most common framing technique in modern residential construction is platform framing, in which each story is framed on top of the previous one. Builders will frame in one-story platforms of typically eight- or nine-foot-high stud walls resting on a subfloor—the platform.
Types of Framing. In general, there are four different types of elements you can use to create a frame within your shot and draw the viewer's attention: architectural, natural, geometric shapes, and light/shadow.
When correctly placed, blocking also provides grounds (also backing or back blocking) for supporting the cut ends of wall claddings and linings or for attaching items such as cabinets, shelving, handrails, vanity tops and backsplashes, towel bars, decorative mouldings, etc.
The small concrete step used at the bottom of walls or columns, a column kicker's main job is to make sure that the coordinates are maintained between floor slabs. Column kickers are only used at the position where walls and columns are constructed.
Types of Framing
Framing can be of two types, fixed sized framing and variable sized framing. Here the size of the frame is fixed and so the frame length acts as delimiter of the frame. Consequently, it does not require additional boundary bits to identify the start and end of the frame. Example − ATM cells.
Types of structures. There are three basic types of structures: shell structures, frame structures and solid structures.
Framing is used to represent the communication aspect which leads to the people's preference by consenting one meaning to another. Framing stimulates the decision making process by highlighting particular aspects by eliminating the others. For e.g. the newspaper frames the news within a particular viewpoint.
There are five main forms of structural frames: Plain Frame, Structural Frame, Space Frame. Monocoque and Semi-Monocoque. These are structures created in two dimensions. An example is seen opposite.
This refers to a list of incomplete items that a contractor must fix before a construction project can be considered complete.
What is blinding in construction? In construction, 'blinding' typically refers to a base layer of weak concrete or sand that is laid above a layer of hardcore to provide a clean, level and dry working surface.
In soccer — also called football in much of the world — every player on the team is a kicker. The noun kicker comes from the verb kick; one guess about the word's origins say it comes from the Old Norse kikna, "sink at the knees."
Backing. Frame lumber installed between the wall studs to give additional support for drywall or an interior trim related item, such as handrail brackets, cabinets, and towel bars. In this way, items are screwed and mounted into solid wood rather than weak drywall that may allow the item to break loose from the wall.
So any sheathing edges that don't land on standard framing (studs, plates, windows/doors) need to be supported by blocking. All edges of wall sheathing must be supported by and nailed to framing. This edge didn't land on plates, so install blocking to support it.
Framing is a construction system. Studs, plates, headers, rafters, girders, flooring and joists are all terms used to identify different components in framing.
Frame structures are the constructions having a blend of column, beam & slab to bear the adjacent and gravity loads. These structures are generally used to overcome the large moments emerging owing to the applied loading.
A perfect frame is that, which is made up of members just sufficient to keep it in equilibrium when loaded without any change in its shape. The simplest perfect frame is a triangle, which contains three members and three joints as shown in Fig 1 if such a structure is loaded its shape will not be distorted.