While the baking soda and vinegar solution is effective in breaking down a clog, it will also cause your drain to become more damaged. The baking soda's abrasive nature will wear down your drain over time. This is why you should avoid using baking soda and vinegar solution for cleaning out your drain.
Baking Soda and Vinegar
Mix together 1/3 cup of baking soda and 1/3 cup of vinegar. The result will fizz almost immediately—it's important that you pour it down your clogged drain right away so you don't lose the effects of that reaction.
For stubborn clogs: baking soda, salt, and vinegar
To clean your drain with baking soda, salt and vinegar, mix half a cup of baking soda with half a cup of salt and pour the mixture down the drain. Boil 1 cup of vinegar and pour it down the drain — the combination will cause a fizzy and bubbly chemical reaction.
Baking Soda and Salt
Baking soda is great for cutting grease in clogged sinks. When it comes to clog removal, mix one part of baking soda with one part salt and four parts of boiling water. Dump this mixture down the drain and let it sit overnight. Flush your drain with hot water in the morning.
One remedy calls for combining a half cup of table salt and a half cup of baking soda and pouring the mixture down the drain. The instructions say to wait 30 minutes (or overnight for a tough clog) before flushing the mixture down the drain with a pot of boiling water.
PVC is resistant to many alcohols, fats, oils and aromatic free petrol. It is also resistant to most common corroding agents including inorganic acids, alkalis and salts. However, PVC should not be used with esters, ketones, ethers and aromatic or chlorinated hydrocarbons.
Though not always the number one recommended long-term solution, baking soda and vinegar along with some hot water can prove to be a serviceable solution to clear your drains.
This can help prevent clog-causing buildup on the interior surface of pipes. Or, pour one cup of vinegar down the drain and let it sit for 30 minutes. Rinse with two quarts of very hot water.
Try pouring hot water down the drain, then follow it with one cup of bicarbonate of soda and a cup of vinegar. Leave it for ten minutes, then chase it with more hot water. A combination of the hot water and the natural cleaner mixture can break blockages up.
Baking soda is a base and vinegar is an acid; when the two are combined, you get a fizzy chemical reaction that has some properties that can eat away at a clog. However, when you use this combination to unclog a drain, it's just plain ineffective.
Leave it in the drain for an hour or two or overnight, and then flush the drain with hot tap water. For larger drains, such as tubs and kitchen sinks, use about a quarter-cup of baking soda, a half-cup of water to move the powder down, and 2 cups of vinegar.
Pouring boiling water is quite risky as it might lead to a steam burn or scalding. Another thing to keep in mind is what type of material you are pouring in into. If you have a porcelain sink, it is likely to crack due to the heat. All in all, pouring boiling water down your drain will only cause issues down the road.
A monthly cleaning will allow you to use safe cleaning methods which will save you time, energy and money in the long term. Combine 1 cup of vinegar, 1 cup of very hot water, and 1 half cup of baking soda and pour the mixture down the drain.
The answer is that vinegar will not harm your pipes if used in small doses as recommended in many of the recipes that you find online. No matter what your pipes are made of, pex, pvc, copper, etc. Vinegar will not harm your water pipes.
Pour 1/2 cup baking soda, followed by 1/2 cup vinegar down drain. Plug drain and let sit for one hour. Then, pour a pot of boiling water down drain. Repeat if necessary.
One of the most effective and safest options for unblocking a clogged toilet is using table salt. Salt is generally inexpensive and readily available. You can use salt together with other products to unclog stubborn toilet drains.
Will Boiling Water Damage PVC Pipes? The general rule of thumb is that hot boiling water can soften or even slightly melt the joints in your PVC pipes so YES, if you subject these types of pipes to high temperature water on a regular basis - they can be damaged, causing leaks and eventually requiring replacement.
Although mixing vinegar and baking soda is not considered dangerous, you should still avoid mixing these in a container. Vinegar is acidic and basic soda is basic, so the by-products are sodium acetate, carbon dioxide, and water that are not toxic.
Some of the leftover baking soda is usually left in the pipe, which can actually make an existing clog worse if the reaction turns it into a sludge that doesn't rinse away easily.
You should use a ratio of 1:2 baking soda to vinegar. In other words, if you're using ½ cup of baking soda, use 1 cup of vinegar, or if you're using a cup of baking soda, use 2 cups of vinegar.