Aslett recommends an easy cleaning solution: a quick squirt of dish detergent in a bucket of water. “Dish detergent is made to cut through grease and grime. Just don't use too much or the floors will be dull.”
Is Lizol better than phenyl? Many different studies have also shown that long-term exposure to phenyl compounds can have serious health consequences. Indian Medical Association recommends Lizol as the most trusted disinfectant because it is easy to use and completely safe for your family's health.
Traditional damp mopping remains the best way to clean many types of floors. While flat mops like Swiffers are great for daily cleanup of dust and light soil, only a good, thorough weekly damp mopping with a proper cleaning solution and a mop can really provide the deep-down cleaning a floor needs.
Mopping with dirty water usually causes that buildup and dirty appearance, even though it was just mopped. Dirt is added to a mop bucket each time the mop is dunked into the water, if you don't change the water you are just transferring the dirt and grime around the floors through the dirty water.
Sweep or vacuum loose debris. Sprinkle baking soda on the floor. Mix one gallon of hot water, one cup of vinegar, and a few drops of dish soap. Mop the floor with the solution, using the scrub brush to remove stubborn dirt, or in high-traffic areas.
Ammonia-water solution
Ammonia is one of the best floor cleaners with remarkable result in removing floor stains and restoring the shine on floor tiles. You can add a few drops of ammonia into warm water in a mop bucket and mix well.
Among the many active ingredients surface and floor cleaners contain, the most common ones are Ethanol – a fluid that acts as sanitizer; Isopropyl alcohol – which is partly responsible for the disinfectant's strong odour; antiseptics such as p-Chloro-o-benzylphenol, o-Phenylphenol, and lactic acid.
Vacuum, dust or wipe with a lightly dampened mop – never use soap-based detergents, as they can leave a dull film on the floor, and avoid over-wetting. Don't use wax polish either, as this will make the floor slippery. To remove marks and stains, use a dilute solution of water and vinegar.
Water + Vinegar + Dish Soap + Rubbing Alcohol
The rubbing alcohol, for example, helps speed up evaporation time to avoid floor streaks and also helps both disinfect and degrease the floors, while dish soap will dissolve the bond between the dirt and floor while it degreases and cleans.
Dust or vacuum (using the hard flooring setting) daily to avoid scratches and damage from dirt and debris buildup. Dust along the grain of the wood for best results. Mop with a microfiber mop. Lightly mist your floor with a gentle floor cleaner and mop along the grain.
High-traffic areas need the most frequent mopping. For most families, high-traffic areas include the entrance, kitchen, bathrooms, and hallways. Any high-traffic areas in your home should be wet mopped once a week. Rooms in your home that are not frequently used—such as a guest room—do not need to be mopped weekly.
Pour some vinegar into a spray bottle and squirt it over the entire floor. Bubbles should start to form – let them sizzle for a little while. After a few minutes, you can scrub the solution with a brush and dry the floor with a towel.
Reichert suggests skipping commercial cleaning products in favor of a vinegar-and-soapy-water solution: Place 1/4 cup vinegar in a spray bottle with 1 drop of dish soap and warm water. Naturally acidic vinegar works with the soap to break down dirt, cut through build-up and disinfect.
Try mopping your tile floor using this DIY cleaning recipe: ¼ cup white vinegar, 1 tablespoon liquid dish soap, ¼ cup baking soda, and 2 gallons of very warm water. You can also add a few drops of lavender essential oil for a fresh scent!
Water, Modified Acrylic Polymer, Trideceth-3, Etoxydiglycol, Oxidized Polyethylene, Maleic Modified Rosin Resin, Zinc Oxide, Fragrance, Ammonium Hydroxide, Benzisothiazolinone, Partially Flourinated Alcohol, Isopropyl Alcohol, Polyethoxylated Methyloctadecylammonium Methyl Sulfate.
Floor Mopping
Mild dish soap is a surprisingly good floor cleaner. All you need is 1 to 2 tablespoons of dish soap mixed in with a bucket of water. Floors will be clean and shiny in no time. Dish soap is very effective on resilient floorings, such as linoleum and vinyl, and also works well on ceramic tile.
Water and Vinegar Solution
To make this solution, just combine 1/2 cup distilled white vinegar with a gallon of warm water. Whether you clean on your hands and knees with a sponge or with a mop, this solution is an effective, basic option that will leave your floors gleaming.
To start, prepare a mixture of water and vinegar in a bucket or other large container. You can choose the ratio based on your preferences, but it's generally recommended to start with a 2:1 ratio of water to vinegar. Next, dip a soft cloth into the mixture and begin scrubbing your tiles in small, circular motions.