Green or brown stains in the toilet usually indicate lime buildup. Lime scale forms as hard water evaporates and leaves a mineral buildup behind. As it dries, it picks up any dirt particles along with it, and slowly the stain builds, layer by layer, on the inside of the toilet bowl. Yuck!
White crusty deposits that may accumulate around the toilet bowl, the end of a faucet or showerhead or appear as water spots come from water rich in the naturally-found calcium or magnesium minerals often referred to as water hardness. Water that is high in alkalinity or silica may also create this accumulation.
Calcium buildup creates a white or rust-colored rim around the toilet water line and leaves hard water stains in toilet bowls.
For this cleaning task, the more, the merrier, pour vinegar (about 1 litre) and a few cups of bicarb will work fine. Give the solution a mix until you have a paste. Then, add it to the toilet bowl and leave it to soak for as long as possible, at least an hour.
You can use straight or a diluted vinegar cleaning solution for the bathroom to clean bacteria, especially around the toilet. Cleaning with a mixture of baking soda and vinegar in the bathroom can work really well. To clean your toilet with vinegar, pour a cup of vinegar in the toilet bowl and let sit overnight.
So does coke remove limescale? Yes. The acid in coke will help to dissolve limescale and there are several examples of it being used to clean toilets, descale kettles and in other circumstances.
For a more heavy-duty approach, you can pour an entire bottle of white vinegar over and around the bowl, remembering to cover all of it. Then, leave the vinegar to work for a few hours or overnight. Use your toilet brush to scrub any leftover limescale deposits away the next day.
Pour about one cup of white vinegar into the toilet bowl, followed by about one cup of baking soda, then let it rest for around 10 minutes. It's a good idea to wear gloves when using this as a toilet cleaner and to have eye protection.
Odor Toilet Tank FAQ
White vinegar and baking soda in equal parts is a cost-efficient and effective means of getting rid odors in a toilet. Add them to the tank, mix them in and then use the toilet brush to gently scrub the tank. Let it sit for a few hours, scrub the tank again and flush.
Vinegar and baking soda produce that oh-so-familiar chemical reaction that powers through buildup and loosens tough stains. While it might seem like it's chewing its way through grime, it's not powerful enough to damage the porcelain finish of the toilet bowl.
For extra-stubborn clogs, you can let the fizz mixture sit overnight or combine this method with plunging. If your toilet remains clogged or continues to get clogged, this may be an indication of plumbing problems such as mineral buildup or pressure issues.
Solution 3: Using WD-40 to remove limescale
Yes, it's that simple. The best part about using a cleaning solution like WD-40 is that its specially engineered formula works its way under the build-up in no time, making the cleaning process easier and more convenient.
Bicarbonate of soda - when teamed with vinegar, baking soda produces a fizzing reaction that can break down almost anything, including limescale. Coke - contains phosphoric acid which can not only remove rust, but also limescale.
"The biggest don't when it comes to toilet tanks is bleach—do not use bleach or products containing bleach inside the tank, as it can corrode the internal parts of your toilet. If you are aiming to remove tough stains from the tank, I also recommend white vinegar diluted with water."
To safely and inexpensively clean your toilet bowls, pour a generous glug of vinegar, followed by a heavy sprinkling of baking soda, into the bowl. While the mixture is bubbling up, scrub the bowl (get under the rim, too). Let it soak for 30 minutes and flush. That's it.
Turn off the water to the toilet, flush the toilet to minimize the water in the bowl, and pour in a gallon of vinegar to remove scale and mineral deposits. Leave the vinegar in the toilet for 24-48 hours. This may improve the flushing.
Let the vinegar and soda solution sit for up to 30 minutes. If there are any stains above the water line, it would be helpful to go over them with your toilet brush one or two more times. One final scrub before you flush should remove any still stuck stains. Flush to rinse.
Of course, we don't recommend using Coca-Cola every time your toilet needs a good scrubbing, as the dark color of the carbonated soda can actually stain the bowl and leave a sugary residue when used excessively.
What I recommend, that works well is distilled white vinegar. As far as your toilet to keep it clean inside the bowl. Use 1 cup of white distilled vinegar and poor inside your toilet tank, also pour half of that cup in to the overflow, which is the small, round pipe that stands up in the middle of the tank .