Yes, this is the product you would use in your kitchen sink to clean dishes, however, it can also be used on tile and grout, countertops, furniture, and more. The secret of the blue dawn solution is the effect of cutting grease and grime.
The most common and effective homemade grout cleaner is a mixture of baking soda, hydrogen peroxide, and dish soap. Cream or tartar and lemon juice is the best all-natural solution for whitening. Avoid using highly-acidic solutions like vinegar because they can corrode grout.
Avoid Vinegar and Baking Soda
Vinegar and other acids are also a bad idea for stone tile because the acid can etch the stone. Another widely praised household cleaner, baking soda, is alkaline (not acid), but it is not very effective as a grout cleaner.
Steps for Cleaning Grout with Homemade Cleaner
Add a few drops of dish soap to the cup. Mix everything together. Pour vinegar along the edges of the grout. Don't do too much at once or the floor will be really wet and more difficult to work on.
Grout that hasn't been sealed, needs to be resealed, or is in poor shape should not be cleaned with vinegar. The vinegar penetrates into the pores of the grout, further weakening the material. Over time, vinegar will deteriorate the condition of the grout by etching or wearing it away.
The easiest way to clean grout without scrubbing involves hydrogen peroxide and baking soda. Mix the two into a paste with some dish soap and apply to the grout lines. Alternatively, you can use a cleaning solution of water, vinegar, lemon juice, and baking soda.
Mix together ½ cup baking soda, ¼ cup hydrogen peroxide, 1 tsp dish soap. Spoon cleaning agents onto grout and let sit for 5-10 minutes. Scrub the grout lines with a brush. Grout cleaning tip: Make sure to scrub hard to agitate the grout and cleaning solution and break up any really stuck dirt.
What's the best homemade grout and tile cleaner? Mix together 1/2 cup of baking soda, 1/4 cup of hydrogen peroxide, and 1 tsp dish soap.
Fill a spray bottle with a half-and-half solution of vinegar and warm water. Spray on the grout, let it stand for five minutes, and then scrub with a stiff-bristled brush using a circular motion.
Mild dish soap is a surprisingly good floor cleaner. All you need is 1 to 2 tablespoons of dish soap mixed in with a bucket of water. Floors will be clean and shiny in no time. Dish soap is very effective on resilient floorings, such as linoleum and vinyl, and also works well on ceramic tile.
Then squirt a pretty good amount of Fairy Liquid onto the rough side of a sponge. By scrubbing your grout lines with this combination, you should be able to remove all of the surface dirt and any living mold spores.
Most people try to clean their grout using bleach, when they should be using detergents. Bleach will permanently damage your grout – so don't be tempted to do this. Detergents are designed to break down oils, fats and grease. The best one in your home is a non-bleaching laundry powder or laundry liquid.
In a large bowl, combine 2 cups of water, ¼ cup of vinegar, and ¼ cup of lemon juice into ½ cup of baking soda. Scoop the mixture over the grout lines. Let it sit for 10-15 minutes. If needed, lightly work the mixture into the tile grout using a toothbrush.
Cleaning Grout with Baking Soda
Baking soda is a safe deodorizer, whitener, and household cleaner—and it's an effective natural grout cleaner. Because baking soda is also a mild abrasive, using it for cleaning grout lines gives you extra firepower without the risk of scratching your tile.
Simply pour vinegar from the bottle into the cap and pour it over the dirty grout lines. Allow the lemon juice or vinegar to sit for 10 to 15 minutes. Then, scrub with a small brush or old toothbrush. Rinse the treated area and wipe dry with a towel or rag.
So, how do you clean grout with vinegar and baking soda? Apparently, vinegar is a popular natural household cleaner, but it's too acidic for cleaning grout. In fact, the acetic acid in vinegar can corrode the grout over time, so you might want to avoid using it for cleaning in this case.
Mix 1 part vinegar with 1 part water (50:50 solution) in a spray bottle. Then spray the paste on the grout with this solution. Immediately, you should see the paste start bubbling, which indicates that the cleaning process has begun.
Run an old toothbrush under some warm water and squeeze a small amount of toothpaste onto the bristles. Gently buff the white grout borders of your kitchen or bathroom with the paste. Adopt a circular motion for this to lift dirt and disturb any deep-rooted stains which may be lingering.