To start, carefully remove the side panel of your PC to allow you access to the motherboard, where the RAM is seated. If you look carefully, you will see there are tabs at the end of each RAM stick (depending on your PC, you may have 2, 4, or 8 DIMMs, or RAM slots). These tabs can be pressed down to release the RAM.
Remove your current RAM modules
Before you can install the new RAM, you must first remove the RAM that is now installed in your desktop computer. You can do this by gently pulling on the clips on either side of the RAM. This way you can easily remove the RAM from your PC.
Because your files, documents, and data are saved on your storage drive, they will remain unaffected when you install new RAM.
RAM is located in Motherboard.
A motherboard is a printed circuit board and foundation of a computer that is the biggest board in a computer chassis. It allocates power and allows communication to and between the CPU, RAM, and all other computer hardware components.
Although the RAM, or main storage, is shown in this diagram and the next, it is not truly a part of the CPU. Its function is to store programs and data so that they are ready for use when the CPU needs them.
The RAM slots are adjacent to the CPU socket. Look for the big heat sink at the top of the motherboard, and you'll see either two or four memory slots next to it. These are the motherboard slots you insert your RAM into. Before you can install the new memory you've purchased, you have to remove the old kit.
Most of the laptops usually have an extra RAM slot where you can plug the extra RAM module. If you don't have an extra RAM slot, you can remove the existing RAM and replace it with a higher capacity RAM.
RAM is located in Motherboard. RAM is located in the central processing unit (CPU) of the computer inside the computer case on the motherboard. The CPU is also often referred as processor. The RAM stores data that the computer needs to use temporarily.
To start, carefully remove the side panel of your PC to allow you access to the motherboard, where the RAM is seated. If you look carefully, you will see there are tabs at the end of each RAM stick (depending on your PC, you may have 2, 4, or 8 DIMMs, or RAM slots). These tabs can be pressed down to release the RAM.
Without RAM, your computer would have to rely on its hard drive or SSD to store and retrieve data, which would significantly slow down its performance. Hard drives and SSDs are much slower than RAM, so using them as the main storage for running applications would cause your computer to run much slower.
If many processes run simultaneously, it may cause high RAM usage problems. You need to check if any unwanted programs have been installed on your computer recently or if many unnecessary programs are running in your computer's background that consumes many RAM resources. Close open programs.
A computer's maximum supported system memory, or RAM, is contingent on the processor, the operating system and the motherboard. These three factors provide hardware and software limitations that determine the maximum amount of RAM a computer can handle.
Processor: RAM stands for Random Access Memory, and is used as a short-term memory storage space. The processor, also known as the CPU, provides the instructions and processing power the computer needs to do its work.
If RAM fills up, the computer's processor must repeatedly go to the hard disk to overlay the old data in RAM with new data. This process slows the computer's operation. A computer's hard disk can become completely full of data and unable to take any more, but RAM won't run out of memory.
Symptoms of RAM failure
You might experience blue screens of death, freezes, reboots, or corrupted files. You might also notice that your computer is slower than usual, or that some applications or games don't run properly or at all.
A motherboard has to be populated with a CPU and RAM before it can work. It really makes no difference in what order you install them, but they all need to be there before you power on the system.
BIOS instructs the computer on how to perform basic functions like booting and keyboard control; it is also used to identify and configure the hardware in a computer such as the hard drive, CPU, memory, and related equipment.
You can usually find the memory options in the "Advanced" section of the BIOS menu. The BIOS menu is different from one computer's manufacturer to the next. Not all BIOS menus have the same RAM options. Disabling options in the BIOS may cause performance issues or damage your computer.
RAM, stands for Random Access Memory, is a hardware device generally located on the motherboard of a computer and acts as an internal memory of the CPU. It allows the CPU to store data, program, and program results when you switch on the computer.